Style 1: with remote
1.High-brightness LED lights
2.Rechargeable lithium polymer battery
3.USB charging, automatic full cut off system
4.USB charging, overcharge protection
5.3 modes: laser/tail lights
Description: Slim and neat shape with round handle sets
The design is bright like a sharp
Not sour dark night sky. "A photo of a corner
Newly designed elastic fastening will firmly install
A variety of shapes and sizes of the body on the outside
Kinds of car models are very high sense of design, with each
1. Wireless remote control turning dot matrix display, wireless remote control cool graphic tail light, wireless remote control brake dot matrix display
Line remote control laser parallel lines,
2. The battery uses a 3.7v650mAh rechargeable lithium ion battery
3. The remote control uses the CR2032 section,
1. Press and hold the main switch for 1 second to turn on (all lights flash three times), then press and hold for 1 second to turn off (all lights flash)
After the machine, the red light flashes on the left side of the host. Press and hold for 3 seconds (host display C), and press any key on the remote control.
2. Turn the steering switch up and turn left (the left indicator light is flashing), turn the steering switch downwards and turn right (right indicator
3. Short press the button on the right side of the remote control to send a cool tail light graphic (middle blue light flash) and off
4. Short press the left button of the remote control to open and close the laser parallel line
5. When the indicator light on the left side of the host is on, it indicates that the battery is not enough to be charged. When the battery is charged, the red indicator light is on.
After the green indicator light
Style 2: no remote
How to use this light?
Press to turn the light on. Seven pictures would show up one by one.
Press again to tur on the laser light.
Press once again to switch it off.
2.Turn signal light function
when you are riding a bike, in order to switch the tail running light on automatically, you just have to lean the bike ( left/right)for about 10 degree. the light would flash for 6 times to warn the vehicles behind you.
When you are riding a bike, if you use the brake , a built-in sensor would send a message to the lights and all the 64 LEDlights would light up automatically and flash for 6 times to warn the vehicles behind you.
- Light: 64-LED infrared bulbs
- Built0in battery: 1200 mAh polymer battery
- Charging time: 3-4 hours
Package contents: 1 x combo bicycle light and turn signal